The Gluefast Company, Inc manufactures the Standard Edge Gluer as well as the Top Side Edge Gluer, which are gluing machines designed for the straight line gluing and coating application of an adhesive along the edge of an item. Both machines have an open end (cantilevered), which allows the adhesive to coat the edge of the item to be glued. Built for heavy industrial use and trouble-free maintenance, the Standard Edge Gluer may be exactly what you need to improve the efficiency of your adhesive system.
The Standard Edge Gluer from Gluefast glues the bottom edge of an item and is available in our #2 and #4 models. The gluing machine models have the ability to glue up to 2” (5 cm) or 3.25” (8 cm) of an edge of paper, chipboard, corrugated, or wood up to 5/8” (16 mm) thick. Achieve the precise amount of glue required for your adhesive application by adjusting the glue film thickness with the simple turn of a knob. The 120-volt motor comes standard with variable speed control, providing flexibility to work with small pieces to glue. In addition, we also have an optional 220-volt motor available with alternative speed controls.
- Electronic Variable Speed Control with 120 volt motor
- Ease of Use and Maintenance
- Precise Glue Control
- 220 volt motor
- 220 volt motor Speed Control
|MODEL||GLUING RANGE||ROLLER SPEED FT./MIN.||FEED TABLE DEPTH X LENGTH||NET WEIGHT LBS.||GLUING CAPACITY LIQUID OZ.||BENCH SPACE||POWER|
|#2||0.25"-2.25"||69-163||4.9" x 10.5"||30||16||7" x 9"||120/220V
|#4||0.25"-3.50"||69-163||5.9" x 1-.5"||33||24||8" x 9"||120/220V
Most gluing and coating machinery applies adhesive to the bottom section of the product but Gluefast's Top Side Edge Gluer was designed to apply an adhesive to the top surface. Our adhesive application equipment, The Top Side Edge Gluer, can drastically increase productivity by eliminating the need to first apply adhesive to one side and then to flip the glued sheet over for another run. Gluefast continues to offer the Standard Edge Gluer to customers that need to apply adhesive only to the bottom edge of a substrate up to 5/8" thick.
An easy-to-use, convenient, adjustable and precise adhesive system, The Gluefast Company's Top Side Edge Gluer is used to apply adhesive to paper, card, corrugated stock or binder board quickly and efficiently. The Top Side Edge Gluer features a fully enclosed gear motor, adjustable glue film and speed control, as well as trouble-free maintenance for heavy industrial use.
The machine glues any stock up to 1" thick and adjusts the glue film width from 1/8" to 3 1/2" so you can apply exactly the amount of adhesive desired. Adjustment of the glue film thickness is as simple as turning a knob. The standard motor speed control gives the operator greater flexibility and is particularly practical when edge gluing smaller pieces. Gluefast’s Top Side Edge Gluer has a large adhesive reservoir that holds more than 1 gallon (5 liters).
- Applies adhesive to the top edge of an item.
- Easy and convenient to use.
- Adjustable glue and speed control.
- 115 volts or 220 volts available.